EMProbeE6
EMC/EMI issue testing is straightforward and accurate with 3D precision technology.
Used to assist high-density board designers to use off-the-shelf hand-held probes and visualize the root causes of potential EMC and EMI problems during pre and post-EMC compliance testing.
Capability:
Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines and report generation.
Supported Spectrum Analysers
http://yictechnologies.com/compatible-devices/
Supported operating systems:
Windows 11®
Supported overlays:
Picture in JPEG format
Standard Gerber© RS274x format and HPGL format CAD files
Max Frequency coverage
18GHz with the supplied Y.I.C. NF Probes
Spatial resolution:
High Resolution: 7.5mm to 0.2mm
The frequency accuracy of peaks:
Peak marking accuracy of the spectrum analyzer
Probe to probe uniformity:
Dependent on the selected probe
Maximum radiated power load:
Dependent on Spectrum Analyzer and the probe performance
Operating temperature:
From 15⁰ C to 40⁰ C (continuous spectral and spatial scans at 50 MHz)
Weight:
3.40Kg (Excluding cables and the adaptor)
