EMProbe
EMC/EMI issue testing is straightforward and accurate with 3D precision technology.
Used to assist high-density board designers to use off-the-shelf hand-held probes and visualize the root causes of potential EMC and EMI problems during pre and post-EMC compliance testing.
Capability:
Spectral scan, spatial scan, peak-hold, continuous scanning, spectral and spatial comparison, scripting, limit lines and report generation.
Supported Spectrum Analysers
http://yictechnologies.com/compatible-devices/
Supported operating systems:
Windows 10®
Supported overlays:
Picture in JPEG format
Standard Gerber© RS274x format and HPGL format CAD files
Max Frequency coverage
18GHz with the supplied Y.I.C. NF Probes
Spatial resolution:
High Resolution: 7.5mm to 0.2mm
The frequency accuracy of peaks:
Peak marking accuracy of the spectrum analyzer
Probe to probe uniformity:
Dependent on the selected probe
Maximum radiated power load:
Dependent on Spectrum Analyzer and the probe performance
Operating temperature:
From 15⁰ C to 40⁰ C (continuous spectral and spatial scans at 50 MHz)
Weight:
3.40Kg (Excluding cables and the adaptor)
3D Precision Technology is used to assist high-density board designers to use off-the-shelf hand-held probes and visualize the root causes of potential EMC and EMI problems during pre and post-EMC compliance testing.
EMProbe enables the PCB and Design Engineers to diagnose EMC/EMI problems using regular off-the-shelf hand-held probes. An easy-to-use Robotic Arm controls the movement of the probe in any direction and an external Spectrum Analyzer provides the results. The EMViewer software is used to control the Robotic Arm and the external Spectrum Analyser collects and analyses the results.
Different types of Robotic Arms can be used, based on the desired size and resolution.